Skip to main content

Product Information


Construction:           Biaxial Orientation Polypropylene
Main Application:    Single sided or double sided application; Easy application;                                                
Protects against abrasion, moisture and constant surface                                                  contact.
Benefits:                    Non-solvent based adhesive protects the print from colour                                             
changing. No bubble, wrinkle or delamination.
Storage Conditions: Stored up to 25°C and up to 50% relative humidity in original                                          
packaging.
Adhesive:                   Thermal Activated EVA Adhesive
Finishes:                    Gloss & Matt
Core:                           1” (25mm), 2” (58mm) or 3”(76mm)

Lamination Curing Time: Once the lamination is completed, it is recommended to lay the laminated print flat for 24 hours to allow the proper adhesive curing time prior to trimming.

Thickness


                                                  Gloss                              Matt
Base Thickness:                12 ± microns                 15 ± microns
Adhesive Thickness:        13 ± microns                 12 ± microns
Total Thickness:               25 ± microns                27 ± microns

 

Standard Stock Sizes

          Codes                 Standard sizes             Core                             Adhesive


Gloss          Matt

B02               –               195mm x 300m             25mm                   Thermal Activated EVA
B04             B03            285mm x 300m             25mm                  Thermal Activated EVA
B06               –               305mm x 300m            25mm                  Thermal Activated EVA
B010            B09            305mm x 300m            58mm                  Thermal Activated EVA
B08             BF07           315mm x 300m             25mm                  Thermal Activated EVA
B012            B011            315mm x 300m             58mm                  Thermal Activated EVA

 

Shipping Dimensions

Standard sizes             Core               Carton Size (cm)              Carton Weight (kg)


195mm x 300m            25mm             25(L) x 23(W) x 25 (H)                       8
285mm x 300m            25mm             34(L) x 35(W) x 35 (H)                      19
305mm x 300m           25mm             36(L) x 23(W) x 23(H)                        9
                                     58mm             37(L) x 27(W) x 27(H)                        10
315mm x 300m            25mm             36(L) x 25(W) x 36(H)                       15
                                     58mm             36(L) x 27(W) x 27(H)                        11

 

Recommended


 

All shipping dimensions and weight are subject to change.
* OUTDOOR LIFE – Will vary depending on installation technique, location and relative position to the sun.
PLEASE NOTE – All information, recommendations and suggestions contained herein, without limitation, stated values (collectively the “information”) shall be used only as a guide by Purchaser and not for specification or any other purpose. The information does not constitute a warranty or guaranty of any type whatsoever. Purchase should independently determine the suitability of all material purchased and must confirm adaptability and other characteristics by conducting its own tests. ALC shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser’s reliance on the information.

 

Australian Laminating Company

Professional Laminating Made Easy

Make an Enquiry

100% Australian Owned

ALC was founded in 2001. We are a family owned and operated company. Our focus is the Australian market & our company has been designed & built to meet the ever changing market.

Reliable Service & Support

We go above and beyond what is required to achieve success. After all, your success is in turn ours.

Money Back Guarantees

We offer a “30 Day Money Back Guarantee” on all our consumable items. If you find our product does not meet the industry standard or has any fault what so ever, return it within 30 days for your money back. That is our promise to you.

Australian Compliant Machines

Our machines have been tested and proven to meet the Australian compliance for electrical equipment. From our pouch laminating machines for the home office to our wide format laminating machines for the commercial environment, we provide our customers with peace of mind.

 

Same Day Despatch

We offer same day dispatch Australia wide. We understand the urgency of getting the right stock at the right price, on time, every time.

Over 15 Years Industry Experience

In this time we have been able to establish an experienced distribution network as well as establish long term relationships with our suppliers which guarantees consistent and reliable quality to our customers.