ALC Budget Monomeric Cold Film
This is a Budget Monomeric Cold lamination film with a range of different finishes available for over laminating digitally printed inkjet prints for short term outdoor UV stability.
Construction: Monomeric PVC
Main Application: Protection against abrasion, moisture, UV and constant surface contact
Shelf Life: Up to 2 years
Storage Conditions: Ideally stored up to 25°C and up to 50% relative humidity in original packaging
Adhesive: 25 ± microns pressure sensitive solvent based acrylic (Clear Permanent)
Features: Optimal clarity
Finishes: Gloss & Matt
Laminating Temperature: Cold or heat assist up to 50°C
Lamination Curing Time: Once the lamination is completed, it is recommended to lay the laminated print flat for 24 hours to allow the proper adhesive curing time prior to trimming.
PVC Film Thickness: 80 ± microns
Adhesive Thickness: 25 ± microns pressure sensitive solvent based acrylic (Clear Permanent)
Total Thickness: 105 ± microns
Liner Thickness: 100 gsm single side PE coated paper
Standard Stock Sizes
Codes Standard sizes Adhesive
PCL01 PCL10 1370mm x 50m Clear Permanent
PCL02 PCL11 1370mm x 100m Clear Permanent
All shipping dimensions and weight are subject to change.
* OUTDOOR LIFE will vary depending on installation technique, location and relative position to the sun.
PLEASE NOTE – All information, recommendations and suggestions contained herein, without limitation, stated values (collectively the “information”) shall be used only as a guide by Purchaser and not for specification or any other purpose. The information does not constitute a warranty or guaranty of any type whatsoever. Purchaser should independently determine the suitability of all material purchased and must confirm adaptability and other characteristics by conducting its own tests. ALC shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser’s reliance on the information.
100% Australian Owned
ALC was founded in 2001. We are a family owned and operated company. Our focus is the Australian market & our company has been designed & built to meet the ever changing market.
Reliable Service & Support
We go above and beyond what is required to achieve success. After all, your success is in turn ours.
Money Back Guarantees
We offer a “30 Day Money Back Guarantee” on all our consumable items. If you find our product does not meet the industry standard or has any fault what so ever, return it within 30 days for your money back. That is our promise to you.
Australian Compliant Machines
Our machines have been tested and proven to meet the Australian compliance for electrical equipment. From our pouch laminating machines for the home office to our wide format laminating machines for the commercial environment, we provide our customers with peace of mind.
Same Day Despatch
We offer same day despatch Australia wide. We understand the urgency of getting the right stock at the right price, on time, every time.
Over 15 Years Industry Experience
In this time we have been able to establish an experienced distribution network as well as establish long term relationships with our suppliers which guarantees consistent and reliable quality to our customers.