ALC Deep Grain Monomeric UV Cold Lamination Film
Product Information
Construction:
Monomeric PVC, Acid Free
Main Application:
Overlaminating digital prints for floor graphics
Shelf Life:
Up to 2 years
Storage Conditions:
Stored up to 25°C, 50% relative humidity in original packaging
Adhesive:
25 ± microns pressure sensitive solvent based acrylic (Clear Permanent)
Features:
Thick, Floor Grade ‘anti slip’, deep grain textured surface
Finish:
Deep grain textured matt
Laminating Recommendations
To ensure the integrity of the product is maintained and the adhesion (stick) factor is not altered, it is vital to apply the laminate to the print through a roll laminator (do not wet apply). For optimal results it is recommended to use a heat assist laminator to a temperature of 50°C and to avoid curl the tension should be as little as possible (nil is best).
The maximum nip pressure (whilst avoiding creasing) should be selected on your laminator. Prints should be degassed for 24 hours if hung vertically and for 48 hours if left horizontal to ensure sufficient degassing of inks prior to lamination. Laminating protects against abrasion, moisture and constant print surface contact.
Certification – CSIRO Testing: AS4586:2013
Test Method Results
Wet Pendulum Test P 2
Dry Floor Friction Test D 1
Wet / Barefoot Ramp Test A
Oil – Wet Ramp Test R 9
Thickness
PVC Film Thickness:
200 ± microns
Adhesive Thickness:
25 ± microns
Total Thickness:
225 ± microns
Liner Thickness:
120 gsm single sided PE & silicone coating
Standard Stock Sizes
Codes Standard sizes Adhesive
L113 1370mm x 50m Clear Permanent
L112 1400mm x 50m Clear Permanent
L111 1525mm x 50m Clear Permanent
Durability
Outdoor vertical application – Up to 2 years*
Indoor floor application – Up to 12 months*
* Outdoor life will vary depending on installation technique, location, climate and relative position to the sun.
PLEASE NOTE – All information, recommendations and suggestions contained herein, without limitation, stated values (collectively the “information”) shall be used only as a guide by Purchaser and not for specification or any other purpose. The information does not constitute a warranty or guarantee of any type whatsoever. Purchaser should independantly determine the suitability of all material purchased and must confirm adaptability and other characteristics by conducting its own test. The seller shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser’s reliance on the information.
100% Australian Owned
ALC was founded in 2001. We are a family owned and operated company. Our focus is the Australian market & our company has been designed & built to meet the ever changing market.
Reliable Service & Support
We go above and beyond what is required to achieve success. After all, your success is in turn ours.
Money Back Guarantees
We offer a “30 Day Money Back Guarantee” on all our consumable items. If you find our product does not meet the industry standard or has any fault what so ever, return it within 30 days for your money back. That is our promise to you.
Australian Compliant Machines
Our machines have been tested and proven to meet the Australian compliance for electrical equipment. From our pouch laminating machines for the home office to our wide format laminating machines for the commercial environment, we provide our customers with peace of mind.
Same Day Despatch
We offer same day dispatch Australia wide. We understand the urgency of getting the right stock at the right price, on time, every time.
Over 20 Years Industry Experience
In this time we have been able to establish an experienced distribution network as well as establish long term relationships with our suppliers which guarantees consistent and reliable quality to our customers.